Magtek USB (UNIVERSAL SERIAL BUS) KEYBOARD EMULATION Manual do Utilizador

USB (UNIVERSAL SERIAL BUS) KEYBOARD EMULATION FULL SIZE SWIPE READER TECHNICAL REFERENCE MANUAL Manual Part Number 99875207 Rev 7 JANUARY

USB HID Keyboard Emulation Swipe Reader • Can use standard Windows drivers for communications. No third part device driver is required. • Many

Section 1. Features and Specifications Table 1-2. Specifications Reference Standards ISO 7810 and ISO 7811/CDL/ AAMVA* Power Input 5V From U

USB HID Keyboard Emulation Swipe Reader 4 6.5"(165.1 mm)1.75"(44.45 mm)6.5"(165.1 mm)1.625"(41.28 mm) Figure 1-2. Dimensio

SECTION 2. INSTALLATION This section describes the cable connection, the Windows Plug and Play Setup, and the physical mounting of the unit. USB C

USB HID Keyboard Emulation Swipe Reader 6 WINDOWS PLUG AND PLAY SETUP On hosts with the Windows operating system, the first time the device is

SECTION 3. OPERATION This section describes the LED Indicator and Card Read. LED INDICATOR The LED indicator will be either off, red, or green.

USB HID Keyboard Emulation Swipe Reader 8

9SECTION 4. USB COMMUNICATIONS This device conforms to the USB specification revision 1.1. This device also conforms with the Human Interface Devi

USB HID Keyboard Emulation Swipe Reader 10 Tk1 SS = % (7-bit start sentinel) Tk2 SS = ; (ISO/ABA 5-bit start sentinel) @ (7-bit start

Section 4. USB Communications 11the device so that the application developer is not burdened with these low level details. Details on how to co

ii Copyright© 2001-2005 MagTek®, Inc. Printed in the United States of America Information in this document is subject to change without notice. No

USB HID Keyboard Emulation Swipe Reader 12 REPORT DESCRIPTOR The HID report descriptor is structured as follows: Item Value(Hex)Usage Page (Ge

Section 4. USB Communications 13COMMANDS Command requests and responses are sent to and received from the device using feature reports. Comman

USB HID Keyboard Emulation Swipe Reader 14 RESULT CODE This one byte field contains the value of the result code. There are two types of resul

Section 4. USB Communications 15Property ID is a one byte field that contains a value that identifies the property. The following table lists a

USB HID Keyboard Emulation Swipe Reader 16 SERIAL_NUM PROPERTY Property ID: 1 Property Type: String Length: 0 – 15 bytes Get Property:

Section 4. USB Communications 17memory so it will not change when the unit is power cycled. The value of this property, if any, will be sent to

USB HID Keyboard Emulation Swipe Reader 18 TRACK_DATA_SEND_FLAGS PROPERTY Property ID: 4 Property Type: Byte Length: 1 byte Get Property:

Section 4. USB Communications 19Set Property: Yes Default Value: 0D (hex) (carriage return) Description: This property is defined as fol

USB HID Keyboard Emulation Swipe Reader 20 This property is stored in non-volatile EEPROM memory so it will not change when the unit is power cy

Section 4. USB Communications 21Description: This character is sent as the track 3 start sentinel for cards that have track 3 encoded in 7 bi

iiiLIMITED WARRANTY MagTek warrants that the products sold to Reseller pursuant to this Agreement will perform in accordance with MagTek’s published

USB HID Keyboard Emulation Swipe Reader 22 PRE_TK_CHAR PROPERTY Property ID: 13 (0D hex) Property Type: Byte Length: 1 byte Get Property:

23SECTION 5. DEMO PROGRAM The purpose of this demo program is not to demonstrate card reading with this HID keyboard emulation device. Use a text

USB HID Keyboard Emulation Swipe Reader 24 if there is any. The application will automatically calculate and send the command data length for y

iv FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of FCC

v

vi TABLE OF CONTENTS SECTION 1. FEATURES AND SPECIFICATIONS...1 F

viiFIGURES Figure 1-1. USB Full Size Keyboard Emulation Swipe Reader---------------------------------------------------- viii Figure 1-2. Dimensi

Figure 1-1. USB Full Size Keyboard Emulation Swipe Reader viii

SECTION 1. FEATURES AND SPECIFICATIONS The USB (Universal Serial Bus), HID Keyboard Emulation, Full Size Swipe Reader is a compact magnetic stripe