Magtek USB MagneSafe V5 Flash Manual do Utilizador

USB MagneSafe V5 Flash Swipe Reader TECHNICAL REFERENCE MANUAL PART NUMBER 99875531-1 MARCH 2011 REGISTERED TO ISO 9001:2008 1

Flash MagneSafe Swipe Reader 4 SPECIFICATIONS Table 1-1 lists the specifications for the MagneSafe V5 Flash Reader. Figure 1-2 shows the dimensio

5 SECTION 2. INSTALLATION This section describes the Windows Plug and Play Setup. WINDOWS PLUG AND PLAY SETUP On hosts with the Windows operating

Flash MagneSafe Swipe Reader 6

7 SECTION 3. OPERATION USER SWITCH The User Switch, or Power Switch, is located on the side of the reader. Pressing the User Switch when the read

Flash MagneSafe Swipe Reader 8 2. If the battery has enough charge to perform this card read but is low, the LED changes to solid red for about t

Section 3. Operation 9 Examples of Host/Application/Reader interaction and state transitions: Example 1 – Power Up, then user swipes a card succe

ii Copyright© 2001-2011 MagTek®, Inc. Printed in the United States of America Information in this document is subject to change without notice. N

iii LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTek’s published specifica

iv FCC WARNING STATEMENT This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to Part 15 of

v Table of Contents SECTION 1. FEATURES AND SPECIFICATIONS ... 1 FEATURES ...

vi Figure 1-1. Flash MagneSafe Reader

1 SECTION 1. FEATURES AND SPECIFICATIONS The Flash MagneSafe V5 Swipe Reader is compact, handheld magnetic stripe card readers that conform to ISO

Flash MagneSafe Swipe Reader 2 FEATURES Major features of the Flash MagneSafe Reader are as follows: • Powered by a rechargeable battery; recharg

Section 1. Features and Specifications 3 REFERENCE DOCUMENTS MagTek Communication Reference Manual for USB MagneSafe V5 Readers (99875475) ANS