Magtek USB MagneSafe Swipe and Insert Reader V5 Manual do Utilizador Página 1

USB MagneSafe V5 Swipe and Insert Reader TECHNICAL REFERENCE MANUAL PART NUMBER 99875388-9 JUNE 2012 REGISTERED TO ISO 9001:20

USB MagneSafe V5 Swipe and Insert Reader 2 FEATURES Major features of the Readers are as follows: • Wired model and wireless model dongle powered

Section 1. Features and Specifications 3 HARDWARE CONFIGURATION The hardware configuration is as follows: Part Number Tracks Style Connector

USB MagneSafe V5 Swipe and Insert Reader 4 Part Number Tracks Style Connector Cable 21073054 1, 2, 3 Black 6’ Mini n/a 6’ USB-A 21073057

Section 1. Features and Specifications 5 SPECIFICATIONS Table 1-2 lists the specifications for the USB MagneSafe Readers. Table 1-2. Specifica

USB MagneSafe V5 Swipe and Insert Reader 6 Figure 1-2. Dimensions for Mini Reader Figure 1-3. Dimensions for Full Size Reader

7 SECTION 2. INSTALLATION This section describes the cable connection, the Windows Plug and Play Setup, and the physical mounting of the unit. USB

USB MagneSafe V5 Swipe and Insert Reader 8 WINDOWS PLUG AND PLAY SETUP On hosts with the Windows operating system, the first time the reader is pl

Section 2. Installation 9 Figure 2-2. Mounting Hole Dimensions for Full Size Reader Figure 2-3. Mounting Hole Dimensions for Mini Reader

USB MagneSafe V5 Swipe and Insert Reader 10

11 SECTION 3. OPERATION USER SWITCH Only the wireless reader model includes a user switch. This section only applies to the wireless model. The U

ii Copyright© 2001-2012 MagTek®, Inc. Printed in the United States of America Information in this document is subject to change without notice. N

USB MagneSafe V5 Swipe and Insert Reader 12 For the wireless reader, after a card swipe but prior to indicating the status of decoding the card d

Section 3. Operation 13 Example 1 – Power Up followed by Authentication and good swipe: 1. Reader Powers Up (State = WaitActAuth:PU). This is

USB MagneSafe V5 Swipe and Insert Reader 14 command (State => WaitActAuth:TOAuth). Host doesn’t know because the reader can/does not send any

15 APPENDIX A. INSERT READER DRAWINGS This section contains the drawings showing the mounting dimensions for the Insert Reader models. The followi

USB MagneSafe V5 Swipe and Insert Reader ___________________________________________________________________________________________ 16 Figure A-

Appendix A. Drawings 17 Figure A-2. Mounting Specification for 21063018 and 21063019

USB MagneSafe V5 Swipe and Insert Reader 18 Figure A-3. Mounting Specification for 21063020 and 21063021

Appendix A. Drawings 19 Figure A-4. Specification for 21063022

USB MagneSafe V5 Swipe and Insert Reader 20 Figure A-5. Specification for 21063023

iii LIMITED WARRANTY MagTek warrants that the products sold pursuant to this Agreement will perform in accordance with MagTek’s published specifica

iv FCC WARNING STATEMENT This equipment has been tested and was found to comply with the limits for a Class B digital device pursuant to Part 15 of

v TABLE OF CONTENTS SECTION 1. FEATURES AND SPECIFICATIONS ... 1 FEATURES ...

vi

vii Figure 1-1. USB MagneSafe Swipe Reader – Full Size Figure 1-2. USB MagneSafe Swipe Reader – Mini Figure 1-3. USB MagneSafe Swipe Read

viii Figure 1-4. USB MagneSafe Insert Reader without bezel Figure 1-5. USB MagneSafe P-Series Insert Reader with Extended bezel

1 SECTION 1. FEATURES AND SPECIFICATIONS The USB (Universal Serial Bus) Readers are compact magnetic stripe card readers that conform to ISO standa